Question about item
Description
Shaft | SPIDERBOWS Raven.One KevTech - 6.2 mm - Carbon
The first shaft and arrow series from SPIDERBOWS is here! - With the Raven.One KevTech, SPIDERBOWS brings its first arrow series in a modern design that is perfectly suited for 3D archery. Noble dark red dominates the exterior of the shaft, which is found on the side of the fletching as a single-coloured cresting and from which any kind of fletching stands out beautifully. The cresting merges with rings in black and silver into the discreet lettering on a black background, which is followed by the highlight of the Raven.One: The characteristic red and black Kevlar look, which extends to the tip end. All in all, a combination that immediately catches the eye of every archer.
With an inner diameter of 6.2 mm / 0.246 inch, the carbon shaft is especially designed for archers who prefer a thin arrow. The shaft has a straightness of ± 0.006 inch and is a real lightweight at 32 inch length. This guarantees precise shots with a flat trajectory even at long distances.
The Raven.One KevTech is available in spines from 400 to 800 and is suitable for all components such as tips, bushings and pins with a (shaft) diameter of 6.2 mm / 0.246 inch.
Technical data:
- Spine 400
- Ø inside: 0.246 inch / 6.20mm
- Ø outside: 7.40mm
- Shaft weight (in grains per inch): 7.84gr
- Straightness (in inches): ±0.006
- Fitting Size Protector Ring / SPHERE Nock Collar: 7.45
- Length:
- Full Arrow: 32 in.
- Factory fletched (selectable): 24-32 in.
- Custom (selectable): 24-32 inch
- Tip:
- Full arrow: 85gr
- Factory fletched: selectable
- Custom: selectable
- Fletching:
- Full arrow: natural feathers, 3 inch shield (red/red/barred white)
- Factory fletched: Natural feathers, 3 inch shield (red/red/barred white)
- Custom: colour and from selectable
- Nock:
- Full arrow: DRAKE S-Nock 3D - Colour: Red
- Factory fletched: DRAKE S-Nock 3D - Colour: Red
- Custom: DRAKE S-Nock 3D - Colour: Red
- Spine 500
- Ø inside: 0.246 inch / 6.20mm
- Ø outside: 7.16mm
- Shaft weight (in grains per inch): 7.02gr
- Straightness (in inches): ±0.006
- Fitting Size Protector Ring / SPHERE Nock Collar: 7.30
- Length:
- Full arrow: 32 in.
- Factory fletched (selectable): 24-32 in.
- Custom (selectable): 24-32 inch
- Tip:
- Full arrow: 85gr
- Factory fletched: selectable
- Custom: selectable
- Fletching:
- Full arrow: natural feathers, 3 inch shield (red/red/barred white)
- Factory fletched: Natural feathers, 3 inch shield (red/red/barred white)
- Custom: colour and from selectable
- Nock:
- Full arrow: DRAKE S-Nock 3D - Colour: Red
- Factory fletched: DRAKE S-Nock 3D - Colour: Red
- Custom: DRAKE S-Nock 3D - Colour: Red
- Spine 600
- Ø inside: 0.246 inch / 6.20mm
- Ø outside: 7.03mm
- Shaft weight (in grains per inch): 5.44gr
- Straightness (in inches): ±0.006
- Fitting Size Protector Ring / SPHERE Nock Collar: 7.15
- Length:
- Full arrow: 32 in.
- Factory fletched (selectable): 24-32 in.
- Custom (selectable): 24-32 inch
- Tip:
- Full arrow: 85gr
- Factory fletched: selectable
- Custom: selectable
- Fletching:
- Full arrow: natural feathers, 3 inch shield (red/red/barred white)
- Factory fletched: Natural feathers, 3 inch shield (red/red/barred white)
- Custom: colour and from selectable
- Nock:
- Full arrow: DRAKE S-Nock 3D - Colour: Red
- Factory fletched: DRAKE S-Nock 3D - Colour: Red
- Custom: DRAKE S-Nock 3D - Colour: Red
- Spine 700
- Ø inside: 0.246 inch / 6.20mm
- Ø outside: 7.03mm
- Shaft weight (in grains per inch): 5.33gr
- Straightness (in inches): ±0.006
- Fitting Size Protector Ring / SPHERE Nock Collar: 7.15
- Length:
- Full arrow: 32 in.
- Factory fletched: (selectable): 24-32 in.
- Custom (selectable): 24-32 inch
- Tip:
- Full arrow: 85gr
- Factory fletched: selectable
- Custom: selectable
- Fletching:
- Full arrow: natural feathers, 3 inch shield (red/red/barred white)
- Factory fletched: Natural feathers, 3 inch shield (red/red/barred white)
- Custom: colour and from selectable
- Nock:
- Full arrow: DRAKE S-Nock 3D - Colour: Red
- Factory fletched: DRAKE S-Nock 3D - Colour: Red
- Custom: DRAKE S-Nock 3D - Colour: Red
- Spine 800
- Ø inside: 0.246 inch / 6.20mm
- Ø outside: 7.00mm
- Shaft weight (in grains per inch): 5.05gr
- Straightness (in inches): ±0.006
- Fitting Size Protector Ring / SPHERE Nock Collar: 7.15
- Length:
- Full arrow: 32 in.
- Factory fletched (selectable): 24-32 in.
- Custom (selectable): 24-32 inch
- Tip:
- Full arrow: 85gr
- Factory fletched: selectable
- Custom: selectable
- Fletching:
- Full arrow: natural feathers, 3 inch shield (red/red/barred white)
- Factory fletched: Natural feathers, 3 inch shield (red/red/barred white)
- Custom: colour and from selectable
- Nock:
- Full arrow: DRAKE S-Nock 3D - Colour: Red
- Factory fletched: DRAKE S-Nock 3D - Colour: Red
- Custom: DRAKE S-Nock 3D - Colour: Red
Scope of delivery:
1x Shaft
Characteristics
| Material: | carbon |
| Spine: | 400700600500800 |
| Inner diameter in inches: | 0.246 |
| Inner diameter in mm: | 6,20 |
| max. length in inches: | 32,000 - 32,999 |
| Outer diameter in mm: | 7,007,037,167,40 |
| Weight in Grain per Inch: | 5,00 - 5,997,00 - 7,99 |
| Shipping weight: | 0,00 kg |
| Item weight: | 0,00 kg |
| Manufacturer's information: | Manufacturer's name: |