Question about item
Description
DRAKE Rivet - 60-64 Zoll - 22-60 lbs - ILF - Take Down Recurve bow
The new DRAKE Rivet riser is unusual: with unusual curves, additional weights and in modern, satin black. The 19 inch long riser is made of magnalium, an aluminium alloy with magnesium content (5%). As a result, at 1318g, the riser gains significantly in weight compared to similar risers, offering more shooting smoothness and stability as well as comforting liability. The advantage of the material is that it has an enormous strength, which is about twice as high as with risers made of pure aluminium.
The additional bar, which extends forward over the hand and acts like a finger guard, houses the three mounts for the screw weights. Each of the three weights weighs 525gn or 34g and can be screwed in or out as required. If you use all the weights, the riser is about 100g heavier.
In addition to the obligatory standard bushings for button, arrow rest and stabiliser, the DRAKE Rivet riser has additional screws and threads for attaching an add-on quiver.
ILF - The full flexibility!
The DRAKE Rivet riser is equipped with the ILF plug-in system. ILF stands for the "International Limb Fitting" system, which is a standardised mounting system where the limbs are not screwed to the riser, but simply plugged in. This system gives you full flexibility in the choice of limbs and you are not tied to any one brand.
For optimal adjustability of the riser and the limbs, the DRAKE Rivet riser is equipped with tiller screws, which can be fixed from below via a hexagon socket screw, and lateral adjustment screws for aligning the limbs.
Only available as a right-handed model.
Technical data:
Length (bow): 60, 62 or 64 in.
Length (riser): 19 inch
Weight (riser without additional weights): 1318g
Weight (riser with additional weights): 1420g
Brace height: 7.5 - 8.5 inches
Material (riser): Magnalium (aluminium alloy with approx. 5% magnesium)
Material (handle shell): Dymondwood
Additional weights (per piece): approx. 525gn / 34g
Please note: The choice of the right string is just as unusual as the Rivet itself. Due to its unusual shape, the Rivet comes in the specified bow lengths, but the bow length indicated on the string must always be 2 inches longer than the bow length of the Rivet. This is the only way to achieve the desired brace height of the bow.
Scope of delivery:
1x bow with string