Question about item
Description
Centerpiece | C.V. EDITION by SPIDERBOWS - Condor Trinity - DUAL - 19-23 inch
With the Condor Trinity, SPIDERBOWS is adding a very special model to its well-known and highly regarded Condor top line. The centerpiece consists of several layers made of highly stable, sustainable wood in cocobolo, burl birch or rosewood design on the inside and outside. Sustainability is achieved through the use of European woods, which not only get their beautiful design through a special treatment, but also gain in stability and weight. Without additional inserts or other materials, this creates a vibration-free centerpiece that impresses with absolute precision.
ILF or screw-in limbs? - Or simply both!
With a classic take-down bow, it is rather difficult to change the limbs for other models, you are usually tied to the respective bow model and its limbs, universal screw-in limbs and systems are rare on the market. If you want different limbs, you often have to buy a completely new bow.
The situation is similar if an aspiring archer wants to switch from a take-down bow with screw limbs to ILF limbs with their even greater variety of limb materials. You have to say goodbye to your "beloved" bow and look for a new one.
What if you could just keep your usual centerpiece and switch between screw-in and ILF limbs as the mood takes you? - Not possible? You can! With the DUAL system from SPIDERBOWS. The system is as ingenious as it is simple: after all, it is only the limb mountings that decide whether to use screw-in or plug-in limbs (ILF). And to make this decision as easy as possible, SPIDERBOWS has made the mounts interchangeable. All SPIDERBOWS centerpieces with DUAL system therefore do not have a classic limb mount ex works, but only a mounting option for the respective limb mountings, which can be converted or replaced in just a few steps.
The DUAL mount with all its options is housed in a solid metal block and forms a closed system. The lateral adjustment for limb alignment in the ILF system, for example, is completely integrated in the metal block and thus avoids cracks in the centerpiece, which can occur in conventional systems because the screw is located in the wooden centerpiece. In addition, there are tiller screws that have an additional ring and a movable head that optimally guides and fixes the limbs. The bow can be optimally adjusted to personal requirements via the tiller and the draw weight of the bow can be adjusted by approx. ±3 lbs.
However, the ILF attachment has a little something more to offer: Due to the requirements of the different sets of rules of the various archery associations, an internal grub screw has been added to the Tiller screw, which serves as an additional locking mechanism. This allows the Tiller screw to be locked in the desired position.
C.V. Edition - Developed by the world champion
Two years of hard work went into the C.V. Edition, which was developed jointly by SPIDERBOWS and Christian Vorderegger, the IFAA World and European Champion. Meeting all his demands and goals was not easy, but with the C.V. Edition, SPIDERBOWS has succeeded in building bows that make no compromises.
Various aspects were particularly important to Christian Vorderegger during the joint development:
- The middle section must be extremely torsion-resistant, really heavy and cut across the middle! SPIDERBOWS has managed to create a middle section without additional aids such as metal inserts or similar, which is extremely stable thanks to the latest generation of stabilized wood and is heavy enough with a total weight of at least 1200g. The combination of these factors enables vibration-free shooting behavior that not only feels extremely pleasant, but also culminates in absolute precision.
- Due to the new asymmetrical geometry of the Condor, the bow window is cut further across the center. Nevertheless, the bow remains absolutely stable and optimizes the arrow flight and the possibilities of arrow tuning.
- Finally, equipped with a comfortable, ergonomic grip, the centerpiece of the Condor fits perfectly in the hand and gives a great feeling when shooting.
Finished by the world champion PERSONALLY
To ensure the quality associated with the name of a world and European champion, all bows are personally tested, signed and prepared ready to shoot by Christian Vorderegger after production.
Characteristics:
- Length: Medium
- Bow length with 19 inch centerpiece: 62 inches
- Bow length with 21 inch centerpiece: 64 inches
- Bow length with 23 inch centerpiece: 66 inch
- Length: Long
- Bow length with 19 inch centerpiece: 64 inch
- Bow length with 21 inch centerpiece: 66 inch
- Bow length with 23 inch centerpiece: 68 inch
- Weight (without limb mountings):
- 19 inch: approx. 920g
- 21 inch: approx. 1020g
- 23 inch: approx. 1220g
- Weight (limb mountings):
- ILF system: approx. 330g
- Take Down System: approx. 320g
- Material: stabilized wood
- Color: cocobolo, rosewood or curly birch
- Available as a right-handed or left-handed model
Scope of delivery:
1x centerpiece (without string)
You can find matching strings at www.bogensportwelt.de/standardsehnen
Proof of material:
https://www.bogensportwelt.de/mediafiles/Bilder/Kategorieseiten/markenwelt/spiderbows/Materialnachweis.pdf
Characteristics
| Hand: | Right HandLeft Hand |
| Riser Material: | Wood |
| Screw on or ILF Limbs: | Limbs to screw onILF Limbs |
| Riser Length: | 19 Inch21 Inch23 Inch |
| Shipping weight: | 0,00 kg |
| Item weight: | 0,00 kg |
| Manufacturer's information: | Manufacturer's name: |